来源：http://jnggsdz.com 发布时间：2019-08-15 16:51:56
With the development of science and technology, light is fabricated into parallel or slightly convergent beams to the coating surface through lenses. The convergent lens receiving part of reflected light is absorbed by cells, and then measured by a receiver measuring instrument. The measured value of the receiver is proportional to the flux through the diaphragm, and the field of view of the receiver can be seen through the diaphragm.
Aluminum plate manufacturer
With this method, the sample must be coated with 1060 pieces on the surface of the coating with good smoothness. If the matrix is slightly bent or locally inhomogeneous, the measurement results will be seriously affected. In addition, the thickness of aluminium film of samples in 1060 must meet the requirement that the test surface flow should be the same product, the surface must be clean, do not touch the test surface, because all these factors will be a better impact on the results of the test.
For the use of 1060 aluminium sheet, this kind of production is continuously produced with the progress of science and technology, which is also helpful for future production.
Professional manufacturer of 1060 aluminium sheet, the above is the aluminium sheet manufacturer we introduced to explain how to determine the gloss of 1060 aluminium sheet. If you want to know more about 1060 aluminium sheet, you can contact us, we will also serve you 24 hours a day. Visit http://jnggsdz.com for more information.